10mm in line one way valve

Renewable Energy and Sustainability Forum

May 23, 2012, 08:15:46 AM

Welcome, Guest. Please login or register.

News: Anyone wishing to register as a new member on the forum is strongly recommended to use a "proper" email address - following recent spam/hack attempts on the forum, all security is set to "high", and "disposable" email addresses like Gmail, Yahoo and Hotmail tend to be viewed with suspicion, and the application rejected if there is any doubt whatsoever
Recent Articles: UPDATE ON DECC APPLICATION FOR LEAVE TO APPEAL TO THE SUPREME COURT \| Yingli Green Energy's PV Module Ranks No.2 in TUV Rheinland Energy Yield Test \| Navitron Solar Showers at Glastonbury for Year 5!

Home

Help

Navitron Renewable Energy and Sustainability Forum > Green Building and Design > Rainwater Harvesting / Grey Water Recovery & Processing > 10mm in line one way valve

Pages: [1] Go Down

« previous next »

Author

Topic: 10mm in line one way valve (Read 1292 times)

AV1

Jr. Member

Offline

Posts: 71

10mm in line one way valve

« on: August 14, 2010, 10:43:20 AM »

Working on this today...Tank in ..with float valve fitted...guttermate in and connected....has anyone got a link to a 10mm in valve to stop the water draining back on the run up to the header tank in the loft (that will be the one that I've yet to purchase in the previous thread).
Adrian


	Logged

Navitron 20 x 47mm tube Navitron solar thermal system (DIY)
2.59Kw solar system (Delmar)
Rainwater system solar pump and assoc anti chatter relay, tank with Cistern with Type AB air gap/ Cat5 with mains top up (DIY)

johnrae

Hero Member

Offline

Posts: 555

Re: 10mm in line one way valve

« Reply #1 on: August 14, 2010, 12:11:04 PM »

How about a pair of 10x15 adapters and a bog standard 15mm check valve