Windsave G83/1 test certificate

[jotec]

Hi again,
I have now got and installed the Windsave GTI on the CHP and it seems to work well . I am filling in the forms for the DNO and need  the test certificate. Unfortunatly I don't have one and can not find it on the web.
Has anyone got one or know of the location of one that I can copy. I have the 'Declaration of conformity' but it does not refer to g83.

They must exist as so many were, allegedly, connected to the grid.
D ick

[Ted]

You need to track down the infamous Nathan Briggs who, I believe, designed them.  I've never seen a G83 cert for the Windsave.

[martin]

or apparently this lot did the G83 certification for them - http://www.aelgroup.co.uk/

[jotec]

Thanks for that. I have found his blog spot and will continue the search.
If there is no certificate about perhaps the DNO will just accept the windsave name, they must have seen them in the past and have them on record?
Time will tell.
D ick

[Ted]

If he is still MD of Advance (difficult to know as his blog hasn't been updated for over 4 years) then his email is nathan@aelgroup.co.uk

This http://www.aelgroup.co.uk/htm/staff.htm suggests he is but the use of the present tense to refer to 2004 doesn't give confidence that the website is particularly up to date.

[jotec]

Thanks Ted, I will keep that on file for if the DNO  gets difficult.

Now to find out what the error codes mean and what I can do with the USB connection also the jumpers on the back of the "brake board",

The inverter seems to be working well and has put 4 kw back into the mains today on test.

Dick