navitron
 
Renewable Energy and Sustainability Forum
UK's most popular Renewable Energy Forum May 23, 2012, 11:26:58 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Anyone wishing to register as a new member on the forum is strongly recommended to use a "proper" email address - following recent spam/hack attempts on the forum, all security is set to "high", and "disposable" email addresses like Gmail, Yahoo and Hotmail tend to be viewed with suspicion, and the application rejected if there is any doubt whatsoever
 
Recent Articles: UPDATE ON DECC APPLICATION FOR LEAVE TO APPEAL TO THE SUPREME COURT | Yingli Green Energy's PV Module Ranks No.2 in TUV Rheinland Energy Yield Test | Navitron Solar Showers at Glastonbury for Year 5!
   Home   Help Search Login Register  
Pages: 1 [2]   Go Down
  Print  
Author Topic: Old heating oil tank  (Read 1869 times)
Philip R
Sr. Member
****
Offline Offline

Posts: 384


« Reply #15 on: January 22, 2011, 01:01:54 AM »

A few years ago a whilst working in a friends garage, a 60 litre drum ( Minature 205 litre steel drum) previously used for petrol was cut in half (not me)for use as a barbecue brazier using an angle grinder. The individual was warned off but did not heed the warnings of what might follow!!

Needless to say, I witnessed the combustion of the vapours within following by a small explosion. The flame lead to a slight readening of the individuals forhead( some blushing, mostly burned).. Luckily not serious injury incurred.

The cutting operation was completed safely and the item used as a barbecue successfully,  ( no pork flavours induced)

Philip R   
Logged
Tombo
Jr. Member
**
Offline Offline

Posts: 92


« Reply #16 on: January 22, 2011, 04:39:48 AM »

Kerosene or diesel tanks are safe enough to open with an angle grinder. Kerosene is more volatile than diesel but both need a wick to burn at temperatures below 40oC.  I have heard of several people dieing as a result of trying to open empty paint thinners drums with angle grinders or cutting torches. Not a good idea. 
Logged
Pages: 1 [2]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.16 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!