Installing Resol DL2 via BT HomeHub 2 (black version)

[2ndBillericay]

i have finally got my flat panels on the roof and my resol pump station all plumbed in and my DL2 Datalogger connected. Now how to access my data on my iphone via the router.

I can view the data from the pump station from within my HomeHub's network but need to 'open a port' on the hub to allow the external connection.

Has anyone got any simple instructions how to do this as i has beaten me.

Many thanks

Richard

Oh, when the pump was turned off on Thursday i reached a 100.2 degrees c stagnant temp on the panels

[2ndBillericay]

I got it working and my iphone display remains static at 19:45 on 29-3-11 but i have the full days graph.
I think i must have put the correct data in the Home Hub so it send the data packet but then changed it so it is now wrong.

More playing with the Home Hub tonight !!!
At least the iphone bit is working !!!

[2ndBillericay]

For some reason the DL2 had frozen !!

Was it the pump station not sending the data or the dl2 not receiving it ??

After turning off both the pump station and DL2 several times to reset them the system all fired up and 12 hours later is still working !!

[tz0c0s]

Keep posting fella, you seem to be breaking new ground. Watching with interest.

Andy

[2ndBillericay]

Now, the last reading on the iphone is 1:10 am on 31-3-11 it looks like the DL2 has frozen again ?? didnt notice until i was in work so will have to reset the system tonight !!

If this keeps on then i suppose i could put a timer set to turn off for 15 minutes every night to allow a system reset.

Any one else had a similar problem ?

[2ndBillericay]

All working fine now - BT change your IP address periodically.
You set up an ip adderss to look at then as soon as it changes you cant access your data until you correct the IP on the app. - Simple

I have to now try getting a fixed IP from someone like NO-IP.COM lets play with that.

had more fun but i will start a new thread about pressure problems !!