navitron
 
Renewable Energy and Sustainability Forum
UK's most popular Renewable Energy Forum May 24, 2012, 09:51:29 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Anyone wishing to register as a new member on the forum is strongly recommended to use a "proper" email address - following recent spam/hack attempts on the forum, all security is set to "high", and "disposable" email addresses like Gmail, Yahoo and Hotmail tend to be viewed with suspicion, and the application rejected if there is any doubt whatsoever
 
Recent Articles: UPDATE ON DECC APPLICATION FOR LEAVE TO APPEAL TO THE SUPREME COURT | Yingli Green Energy's PV Module Ranks No.2 in TUV Rheinland Energy Yield Test | Navitron Solar Showers at Glastonbury for Year 5!
   Home   Help Search Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Wood pellet stove fan noise  (Read 638 times)
thehat
Newbie
*
Offline Offline

Posts: 15


« on: December 05, 2011, 01:59:16 PM »

We have an MCZ Musa Hydro wood pellet stove which provides all of our hot water in winter, and central heating. It's fantastic, and it was a good decision. A drawback is noise - I can live with the fan noise as the stove fires up and down in our living room, but it is also making noise outside which is apparently disturbing the neighbours. The flue pipe comes straight out the back and through the wall into the adjoining garage, then straight up and out the garage roof. I suspect the garage is acting like an echo chamber - if you walk by outside there's a droning noise, which is rather louder than is neighbourly.

Has anyone else come up against a similar issue? Is there any mileage in lagging the flue pipe to muffle things, assuming it's safe to do that? (It never gets more than warm to the touch.) Should I try to soundproof the garage - eg padding the up-and-over metal door? Suggestions welcome! Thanks.
Logged
dhaslam
Hero Member
*****
Offline Offline

Posts: 4561



« Reply #1 on: December 05, 2011, 03:27:41 PM »

It is no harm to  insulate the flue anyway but  that seems the best option for sound.   I suppose you will need to use something  like rockwool and box it in.   
Logged
thehat
Newbie
*
Offline Offline

Posts: 15


« Reply #2 on: January 24, 2012, 01:32:59 PM »

Just in case anyone else ever has this problem... In the end we solved it (not 100%, but significantly) by adding a special silencer to the top of the flue pipe. Two or three of the main twin wall flue manufacturers seem to make these (about £200).
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.16 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!