navitron
 
Renewable Energy and Sustainability Forum
UK's most popular Renewable Energy Forum May 25, 2012, 08:23:54 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Anyone wishing to register as a new member on the forum is strongly recommended to use a "proper" email address - following recent spam/hack attempts on the forum, all security is set to "high", and "disposable" email addresses like Gmail, Yahoo and Hotmail tend to be viewed with suspicion, and the application rejected if there is any doubt whatsoever
 
Recent Articles: UPDATE ON DECC APPLICATION FOR LEAVE TO APPEAL TO THE SUPREME COURT | Yingli Green Energy's PV Module Ranks No.2 in TUV Rheinland Energy Yield Test | Navitron Solar Showers at Glastonbury for Year 5!
   Home   Help Search Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: bio cooker  (Read 2316 times)
neil
Newbie
*
Offline Offline

Posts: 25


« on: November 12, 2008, 06:26:13 PM »

Hi i have a cooker that runs on bottle gas (propane)

would there be a problem running it on bio gas.

thanks Neil
Logged
martin
Administrator
Hero Member
*****
Offline Offline

Posts: 11438



WWW
« Reply #1 on: November 12, 2008, 06:40:39 PM »

probably.........I'd guess that you'd have to make the 'oles bigger as biogas is not as "powerful" as the bottled variety
(rather like when there was a nationwide conversion to North Sea Gas - every single appliance had to be altered) Wink
Logged

Unpaid volunteer administrator and moderator (not employed by Navitron) - Views expressed are my own - curmudgeonly babyboomer! - http://www.farmco.co.uk
Ivan
Guest
« Reply #2 on: November 13, 2008, 09:25:25 PM »

Yes, Martin's right. Also, biogas has a very slow flame propagation speed, so the flame is easily blown out. Personally, I'd probably add something that will glow redhot in the flame (eg some wire mesh) so that it can relight if it is blown out.
Logged
neil
Newbie
*
Offline Offline

Posts: 25


« Reply #3 on: November 15, 2008, 01:39:28 PM »

thanks for help.

what is best way to use biogas,heard people use it for argas,boilers ect.

would they have the same problem.

thanks neil
Logged
Alan
Guest
« Reply #4 on: November 15, 2008, 04:42:37 PM »

The way Bio gas, or any other by product type gas is used for heat generation is to have a base flame Oil or Gas of a fixed percentage.
With auxiliary injection nozzles for the other types of gas.
The other types of gas are only introduced after the base flame has been ignited in the correct sequence.
Feedback from exhaust oxygen / carbon monoxide levels are then used to control the air inlet damper to maintain the correct air fuel ratio for what ever type of gas is injected.
On smaller efflueent plants the gas is burnt with high excess air levels if the exhaust oxygen levels are not monitored.
Because the calorific value / water content on Bio gas is so changeable it is not as straight forward to use it on a small scale. It could be introduced into the air flow of an oil / gas boiler after the normal burner has been ignited in the normal way.

Regards

Alan
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.16 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!