Today,,, we are mostly bin wurkin in the 'igh level tip, AKA the loft.
Yesterday as you will recall we finished and charged the solar loop, fixed all the flashings and lagged most of the pipery. This morning no rain came through the roof and the gauge thingy was stuck at the same reading as before, even after a wack with a 'ammer, so no stopping ole Jarek now, a flurry of hakensore and gurgleage and the old HWC comes flying down the ladder, closely followed by loads of scrap copper and more shouts of "curver", ooeerr? I meanwhile just about had time to get the heating, hot, and cold drained down before the deluge.
Problem no 246-3 type A The blinkin TS doesn't fit under the CWC stillage, no worries whip off the deck and cut a 50cm hole in it and now the TS can peep through. Ok re jig the outlets on the CWC, and as we have already brought the feed and vent from the HWCyl up to the loft, it was the work of a moment to connect up. Funny how a moment can last 2 hours
it/s now half eleven and all we have to do is connect up the primarys to the cyl and fill it all up. Open the gates of flood Jarek I shout while eyeballing that cylinder,,,,,,,,ho hum,,,,, dooobee dooobee
, seemed to take ages to fill up. Are Navitron cylinders bigger inside than out, gurgle, bloosh, at last full and no leaks,,,, well no big leaks.Fill heating and bleed out, shift cylinder stat, press button and put the kettle on, phew made it. 40 mins later and stat clicks to satisfied and a cyl half full of nice hot water, best of all delivery time to kitchen is about half what it was and the bathroom slightly quicker, and all escaped heat is in the kitchen which doesn't have any other heating.
Fingers crossed for a decent day tommorrow and we will" insert our pipes" ooh missus, and we will be cooking on gas, well showering on fusion anyway.
More soon (pooter willing)
Desperate
