navitron
 
Renewable Energy and Sustainability Forum
UK's most popular Renewable Energy Forum May 25, 2012, 04:10:20 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Anyone wishing to register as a new member on the forum is strongly recommended to use a "proper" email address - following recent spam/hack attempts on the forum, all security is set to "high", and "disposable" email addresses like Gmail, Yahoo and Hotmail tend to be viewed with suspicion, and the application rejected if there is any doubt whatsoever
 
Recent Articles: UPDATE ON DECC APPLICATION FOR LEAVE TO APPEAL TO THE SUPREME COURT | Yingli Green Energy's PV Module Ranks No.2 in TUV Rheinland Energy Yield Test | Navitron Solar Showers at Glastonbury for Year 5!
   Home   Help Search Login Register  
Pages: [1] 2   Go Down
  Print  
Author Topic: Moxi's PV  (Read 3455 times)
Moxi
Sr. Member
****
Offline Offline

Posts: 293


« on: October 08, 2009, 09:04:31 PM »

Well after two and a half weeks the wife has relented and shown me how to upload photos  fight so I've made her a cuppa and sat her in front of the log burner  surrender while I start to upload photo's

09:30 hours and the vans arrived!



blimey! 09:36 and stuff starts to drop on the lawn, they don't hang around these lads!



One of the things that made me pick this company was the fact that they didn't charge extra for the scaffold unlike every one else who quoted.
« Last Edit: October 08, 2009, 09:27:14 PM by Moxi » Logged
Moxi
Sr. Member
****
Offline Offline

Posts: 293


« Reply #1 on: October 08, 2009, 09:07:18 PM »



They really were very efficent...



Logged
Moxi
Sr. Member
****
Offline Offline

Posts: 293


« Reply #2 on: October 08, 2009, 09:10:36 PM »



A quick measure up to confirm the line



The lifting the tiles in preparation for the brackets and chanel



Thats the brackets fixed then....
Logged
Moxi
Sr. Member
****
Offline Offline

Posts: 293


« Reply #3 on: October 08, 2009, 09:18:14 PM »



quickly followed by the channels



ooh look some breaking cloud quick fit the panels!



meanwhile round the corner the cable conduit is going up, the guys offered to drop it in the cavity or via conduit so I opted for external as I've plans for the future and this side of the house is not on general view.
Logged
Moxi
Sr. Member
****
Offline Offline

Posts: 293


« Reply #4 on: October 08, 2009, 09:24:21 PM »



I said they were quick, while I was around the corner watching the conduit they put the panels up and started to clean up!  Shocked



A quick lunch break, followed and at 1:30 pm they got back in the van and left me with a shiny new 1.44kWp array, no mess, no fuss, no drama a really FANTASTIC company!
Logged
StBarnabas
Hero Member
*****
Offline Offline

Posts: 2111


St Barnabas Chapel (2009)


« Reply #5 on: October 08, 2009, 10:31:16 PM »

Moxi
how much! - a bit more painless than mine!
StB
Logged


Gestis Censere. 40x47mm DHW with TDC3. 3kW ASHP, 9kW GSHP, 3kW Navitron PV with Platinum 3100S GTI, 6.5kW WBS, 5 chickens. FMY 2009.
tony.
Guest
« Reply #6 on: October 09, 2009, 07:08:54 AM »

looking good, very jealous

cables in the cavity are a no no so its good you picked external conduit.
clearly not pasma trained, but thats not your fault.
have fun with it tony
Logged
Moxi
Sr. Member
****
Offline Offline

Posts: 293


« Reply #7 on: October 09, 2009, 07:44:09 AM »

Hi StB,

£4450 after the grant back from the LCBP, still a lot, but well worth it IMO, since install at 1:30pm on the 16th of September the system has generated 66kWh with approximately 75% of that going to the grid.  Smiley

Logged
Moxi
Sr. Member
****
Offline Offline

Posts: 293


« Reply #8 on: October 09, 2009, 07:50:48 AM »

Hi Tony,

You'll have to excuse my ignorance ?pasma? not sure what that is but just in case I have misrepresented my installer he did advise that there was a lot more effort and work required for the cavity option although it could be done, me being easy going and quite eager to get the panels up opted for the easier approach of down the side of the house (plus I have the option to put additional panels up later when (if  faint) I can scrape sufficient funds together.

Moxi  Smiley
Logged
2807
Full Member
***
Offline Offline

Posts: 149



« Reply #9 on: October 09, 2009, 08:35:50 AM »


You'll have to excuse my ignorance ?pasma? not sure what that is


http://www.pasma.co.uk/
Logged
Moxi
Sr. Member
****
Offline Offline

Posts: 293


« Reply #10 on: October 09, 2009, 09:15:13 AM »

Thanks 2807

and there was I thinking it was something to do with the cavity  banghead
« Last Edit: October 09, 2009, 10:46:21 AM by Moxi » Logged
petertc
Sr. Member
****
Offline Offline

Posts: 488



« Reply #11 on: October 09, 2009, 01:20:24 PM »

I would say that that is very good value.

my diy install 640wp cost me about £3300 in total no grant on that .
so you have double the size for not a lot more money
Logged
StBarnabas
Hero Member
*****
Offline Offline

Posts: 2111


St Barnabas Chapel (2009)


« Reply #12 on: October 09, 2009, 02:52:19 PM »

Hi StB,

£4450 after the grant back from the LCBP, still a lot, but well worth it IMO, since install at 1:30pm on the 16th of September the system has generated 66kWh with approximately 75% of that going to the grid.  Smiley



Moxi
that is exceptional value, £3.09 -cheaper than my system per Wp. Of course no grant and 15% VAT in my case. The StB system has generated 342kWh from install 169kWh since the 16th Sept so I am probably doing a bit better than you. (I have a bit over twice your installed capacity)
StB
Logged


Gestis Censere. 40x47mm DHW with TDC3. 3kW ASHP, 9kW GSHP, 3kW Navitron PV with Platinum 3100S GTI, 6.5kW WBS, 5 chickens. FMY 2009.
Moxi
Sr. Member
****
Offline Offline

Posts: 293


« Reply #13 on: October 09, 2009, 07:46:07 PM »

Hi PeterC and StB,

I had spent a lot of time going through the forum and looking at accredited installers sites as well as the DIY option.  During that research I found a company (moderators would it be OK to name the company as they install which isn't in competition with Navitron? please advise) who had a quite unassuming web site with a very simple special offer at the very good price noted above.   Since I had severe reservations about working on the roof I started to plan.  What finally clinched it was when I asked Medward who he had used (I suspected it was the company I was planning to use) and he confirmed my suspicions, he also said he had received the same excellent standard of service.  That was sufificient confirmation for me and the rest is, as they say, history.

I've been chuffed to bits with the output, clear blue skies gives between 5 and 6.5 kWh for a day, heavy overcast see's 1.5 kWh the rest sits in between.  I've signed up with SSE at the 28p/kWh exported and am awaiting the new import export meeter being fitted at the moment.

Just waiting to see what happens with FITs now as I'm planning another array of panels as a sun porch across the back of the house (2 or 3 degrees west of true south) although if OFGEM claims stack up ( I work in the power industry and know how degraded some of the generating fleet is) I might be looking at another 18 panels and off grid.   sh*tfan

Moxi
Logged
jango
Jr. Member
**
Offline Offline

Posts: 66



« Reply #14 on: October 09, 2009, 11:50:21 PM »

Gland you are happy with it, off grind sounds good to me just doing one at the mo log cabin in tickhill south yorkshire.
Logged

Been installing pv, solar hot water, chp air/ground heat pumps and wind for some time now.
Pages: [1] 2   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.16 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!