| follow us now on... |
 |
 |
 |
| navitron are proud sponsors of... |
 |
| see our ranking on... |
|
|
| Renewable Energy Installer Magazine |
 |
Home >> Wind Turbines >> 500w wind turbine
WIND500W24V
500w wind turbine
500w wind turbine
500W
|
|
|
|
RATED POWER |
500W |
|
MAX POWER |
700W |
|
OUTPUT DC VOLTAGE |
24V |
|
START WIND SPEED |
3m/s |
|
RATED WIND SPEED |
8m/s |
|
MAX WIND SPEED |
40m/s |
|
Cut-Out Wind Speed |
None |
|
Blade Pitch Control |
None, Fixed Pitch |
|
Overspeed Protection |
Auto Furl |
|
Gearbox |
None, Direct Drive |
|
|
-40 to +60°C |
|
ROTOR Diameter |
2.70m |
|
Rotor speed |
400rpm |
|
blade |
3 |
|
Blade material |
Reinforced fiber glass |
|
Height of tower |
6.0m |
|
Generator |
3 phase permanent magnet alternator |
|
|
|
|
Weight |
131 kg |
|
Packing for shipping |
Four Cartons |
|
|
|
|
The 500W wind turbine is supplied as a complete kit. The only other things you will need to install this unit are: a set of deep cycle batteries and inverter, a diversion load controller and cement for the foundations. The following items make up the 500W wind turbine kit: |
|
|
|
|
|
|
|
|
|
|
| 3 x 2m section tower, labelled upper, middle and lower (or 2 x 3m tower sections) | |
|
|
|
|
Box2: |
|
|
|
|
|
Footing for the tower, including pivot bolt; 3 catenary wire pieces for stays, 6 U-Bolts to secure catenary wires, 2 round spikes for securing footing 3 angles pegs to secure catenary wire to ground, 3 turnbuckles with hook and eye ends |
|
|
|
|
|
Box: 3
Rectifier / Regulator, Wind turbine body including cabling and bolt for tail, blade hub with 6 bolts and restraining pieces, Fin, A nose cone,
Box 4:
Set of 3 blades
specifications and packaging subject to change without notice. Sometimes kit may be packed in fewer or greater numbers of boxes |
|
PLEASE BE AWARE TURBINES MUST NOT BE ALLOWED TO ROTATE WITHOUT SUFFICIENT LOAD BEING APPLIED
Compatible Products
