RATED POWER

200W

MAX POWER

300W

OUTPUT DC VOLTAGE

24V

START WIND SPEED

3m/s

RATED WIND SPEED

6m/s

MAX WIND SPEED

40m/s

Cut-Out Wind Speed

None

Blade Pitch Control

None, Fixed Pitch

Overspeed Protection

Auto Furl

Gearbox

None, Direct Drive

Temperature Range

-40 to +60°C

ROTOR Diameter

2.20m

Rotor speed

450rpm

blade

3

Blade material

Reinforced fiber glass

Height of tower

4.5m

Generator

3 phase permanent magnet alternator

Sine Inverter power output

AC 220V, 50HZ

Weight

78 kg

Packing for shipping

Three Cartons
76x57x30cm-55kgs
227x6x10cm-23kgs

The 200W wind turbine is supplied as a complete kit. The only other things you will need to install this unit are: a set of deep cycle batteries and inverter(which we can supply, if required), a diversion load controller and cement for the foundations. The following items make up the 200W wind turbine kit:

3 section tower, labelled upper, middle and lower (each 1.3m long):

Tail-section including 6 bolts for fin;

3 blades;

3 catenary wire pieces for stays;

6 U bolts to secure catenary wire;

2 round spikes for securing footing;

3 angled pegs to secure catenary wire to ground;

3 turnbuckles with hook and eye ends;

Box2:

Footing for the tower, including pivot bolt;

Wind turbine body including cabling and bolt for tail;

Blade hub with 6 bolts and restraining pieces

Fin;

A nose cone

Rectifier/regulator unit

specifications and packaging subject to change without notice. Sometimes kit may be packed in fewer or greater numbers of boxes