navitron
 
Renewable Energy and Sustainability Forum
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Anyone wishing to register as a new member on the forum is strongly recommended to use a "proper" email address - following recent spam/hack attempts on the forum, all security is set to "high", and "disposable" email addresses like Gmail, Yahoo and Hotmail tend to be viewed with suspicion, and the application rejected if there is any doubt whatsoever
 
Recent Articles: Navitron Partners With Solax to Help Create A More Sustainable Future | Navitron Calls for Increased Carbon Footprint Reduction In Light of Earth Overshoot Day | A plea from The David School - Issue 18
   Home   Help Search Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: fiber cement roof sheeting and mounting a 30 tube panel  (Read 237 times)
clifden
Newbie
*
Offline Offline

Posts: 1


« on: July 13, 2018, 07:46:41 AM »

Good morning .
just joined the navitron forum - loads to read on here .
I am looking for suggestions to install a evacuated tube array -30 tubes on my roof .
the issue is the roof has a fibre cement sheeting - profile six from marley eterit .over wooden raffters and deck
I am looking at hanger bolts but not sure if the frame that makes up the solar tube frame will be able to be supported on bolts or if it needs to have a sub frame of some sort -
such as an A frame - But the roof already has a 30 degree pitch so would need to lower the A frame angle
any suggestions would be appreciated
regards
clifden
Logged
Iain
Hero Member
*****
Offline Offline

Posts: 1594


« Reply #1 on: July 13, 2018, 08:27:54 AM »

Hi

Used these for my solar PV on a slate roof but would work well on yours.

On my Solar Thermal I just used stainless coach screws and neoprene seals and bolted straight through to rafters.

For your solar thermal the bolts in the link would be fine. Keeps the weight off the roof covering and also seals to the covering well.

https://www.google.co.uk/imgres?imgurl=https%3A%2F%2Fi.ebayimg.com%2Fimages%2Fg%2FY6kAAOSwHPlWeVLy%2Fs-l300.jpg&imgrefurl=https%3A%2F%2Fwww.ebay.co.uk%2Fitm%2FSolar-Panel-PV-Roof-Fixing-Stainless-Steel-Screw-Hanger-Bolts-M10-x-200MM-%2F272084449712&docid=un8zXT75iDw-5M&tbnid=SEsPMoT5ms9YTM%3A&vet=10ahUKEwiliufxx5vcAhVpDMAKHdcfBR8QMwhhKAQwBA..i&w=300&h=225&bih=786&biw=1279&q=solar%20roof%20bolts&ved=0ahUKEwiliufxx5vcAhVpDMAKHdcfBR8QMwhhKAQwBA&iact=mrc&uact=8

Iain
Logged

1.98kWp PV (11 x Sharp 180 and SB 2.5)
20 x 65mm Thermal and 180ltr unvented
Powervault 4Kw
9000ltr rainwater storage   Plymouth
http://www.bdpv.com/fiche_utilisateur_en.php?util=iain
http://www.sunnyportal.com/Templates/PublicPageOverview.aspx?plant=cba8d47f-bf09-4533-a105-4303b353f20f&splang=
DonL
Hero Member
*****
Offline Offline

Posts: 505


« Reply #2 on: July 13, 2018, 05:16:27 PM »

You are confident this is not asbestos cement? if in doubt it can easily be tested. If it is asbestos cement the approach described by Ian can still be used but there are safety procedures to follow, which I have used successfully.
Don
Logged

Schuco solar hot water - 3300kWh/annum, 16 BP 4175N PV panels - 2.8kWp, log burner and back boiler and 18 Ying Li 235 PV panels - 4.2kWp, 42kW ground mount PV, 9kW Panasonic ASHP
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
SMFAds for Free Forums
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!