navitron
 
Renewable Energy and Sustainability Forum
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Anyone wishing to register as a new member on the forum is strongly recommended to use a "proper" email address. Following continuous spam/hack attempts on the forum, "disposable" email addresses like Gmail, Yahoo and Hotmail tend to be viewed with suspicion, and the application rejected if there is any doubt whatsoever
 
Recent Articles: Navitron Partners With Solax to Help Create A More Sustainable Future | Navitron Calls for Increased Carbon Footprint Reduction In Light of Earth Overshoot Day | A plea from The David School - Issue 18
   Home   Help Search Login Register  
Pages: 1 [2]   Go Down
  Print  
Author Topic: Battery help  (Read 5493 times)
jhinshel
Jr. Member
**
Offline Offline

Posts: 57


« Reply #15 on: July 16, 2010, 09:51:18 PM »

daveb275
Let us know what  you  have decided ....
Getting a good configuration can really make a difference for useability and cost.
On the whole, you want to minimise the currents that you are dealing with, because the higher the current, the higher the cost of the equipment.
Batteries are always a stumbling block - even scrap prices can be pretty high.
So ....
my take on this has been to get high capacity second hand batteries (fork lift)
accept that used batteries will be low efficiency (perhaps 30% of useable electricity from the charge)
48v means taking more care than 24v - properly insulated tools, risk of electric shock etc...
be prepared to be able to regularly charge the batteries - poorly charged batteries are useles
have a variety of power sources to keep a constant trickle into the batteries
regularly charge the batteries to full capacity - this can take alot of power!
Logged

off grid 4 years: 2.5kw pv,sunny island 5048, 2 mx 60s, proven 2.5 48v, home made charge controller, 1500Ah fork lift batteries, 60 evacuated tube solar heating, vigas 40 kw biomas boiler, 3000l thermal store
Pages: 1 [2]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
SMFAds for Free Forums
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!