navitron
 
Renewable Energy and Sustainability Forum
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Anyone wishing to register as a new member on the forum is strongly recommended to use a "proper" email address - following recent spam/hack attempts on the forum, all security is set to "high", and "disposable" email addresses like Gmail, Yahoo and Hotmail tend to be viewed with suspicion, and the application rejected if there is any doubt whatsoever
 
Recent Articles: Navitron Partners With Solax to Help Create A More Sustainable Future | Navitron Calls for Increased Carbon Footprint Reduction In Light of Earth Overshoot Day | A plea from The David School - Issue 18
   Home   Help Search Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: RO2FIT - Proof of Ownership Question, Help Required  (Read 1901 times)
Hal64
Newbie
*
Offline Offline

Posts: 7


« on: October 29, 2010, 11:09:11 AM »

Hi,

Have a small DIY system commissioned back in March '10 under the RO scheme for which I've got Ogem accreditation. Have made my RO2FIT application with EDF but it is stalled with them now asking for my "invoice/receipt for the generation system" as proof of ownership.

The system has been pulled together from 'odds & sods' , private purchases, Ebay purchases etc and then self installed to meet regulations. Panels are MCS and inverter is G83/1. Tried to explain that given these circumstances I don't have an "invoice/receipt for the generation system". Anyone been in the same boat or have any good ideas to overcome this.

Any help appreciated.
Logged

11kW ASHP + Uponor UFH, 3kW EcoCent DHW ASHP, 8kW WBS, 0.2kWp Solar PV, 2,000L RWH
BruceB
Hero Member
*****
Offline Offline

Posts: 1044


« Reply #1 on: October 29, 2010, 11:32:27 AM »

Call yourself in your trade capacity HAL64 Systems.
Issue an invoice.
Logged
knighty
Hero Member
*****
Offline Offline

Posts: 2819


« Reply #2 on: October 29, 2010, 11:35:14 AM »

take photos and send them in too?
Logged
Justme
Hero Member
*****
Offline Offline

Posts: 3560


« Reply #3 on: October 29, 2010, 02:03:30 PM »

Change supplier?

Logged

Navitron solar thermal system
30 x 58mm panel 259L TS
1200watts solar 120vdc
FX80 Solar controller
2 x Victron Multiplus II 48/5000/70
Cerbo GX & GX 50 touch
BMV 700
6kva genny
48v 1000ah
Grid Possibly coming soon
Hal64
Newbie
*
Offline Offline

Posts: 7


« Reply #4 on: October 29, 2010, 03:17:47 PM »

Being advised that this is an Ofgem requirement and that all FIT licencees should require this information.

Unfortunately have just changed supplier from nPower to EDF - may live to regret that as nPower's original forms did not mention this requirement, but they may have tightened up by now.
Logged

11kW ASHP + Uponor UFH, 3kW EcoCent DHW ASHP, 8kW WBS, 0.2kWp Solar PV, 2,000L RWH
blackhawk
Newbie
*
Offline Offline

Posts: 30


« Reply #5 on: October 29, 2010, 05:54:59 PM »

You have a pc all you have to do is bill yourself for the install at 0.00 job done
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
SMFAds for Free Forums
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!