navitron
 
Renewable Energy and Sustainability Forum
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Anyone wishing to register as a new member on the forum is strongly recommended to use a "proper" email address - following recent spam/hack attempts on the forum, all security is set to "high", and "disposable" email addresses like Gmail, Yahoo and Hotmail tend to be viewed with suspicion, and the application rejected if there is any doubt whatsoever
 
Recent Articles: Navitron Partners With Solax to Help Create A More Sustainable Future | Navitron Calls for Increased Carbon Footprint Reduction In Light of Earth Overshoot Day | A plea from The David School - Issue 18
   Home   Help Search Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: forklift batteries in the freeze,  (Read 1440 times)
biff
Global Moderator
Hero Member
*****
Offline Offline

Posts: 11876


An unpaid Navitron volunteer who lives off-grid.


« on: November 30, 2010, 07:56:04 AM »

hi folks,
           we have a bit of a freeze here,-6 last night and -2 this morning. remember last year when the freeze came.? some of us were not quite prepared and our systems stopped working  below -8.(im not quite sure exactly,we had -12 for days) it is important to remember that forklift batteries are highly explosive babies and placing heaters etc next to them is really not the thing to do or will have to be thought through extremely carefully,. it is difficult to insulate them because they require good ventilation to the open air to prevent the buildup of gas.if by chance your system stops working ,,ie not charging or giving out the charge,do not worry it will return to normal once the temp rises.any attempt to force the charge into batteries below -8 will only result in damage to the batteries or controller.
       now i hope i have got that right ,wackoold
                                      biff
Logged

An unpaid Navitron volunteer,who has been living off-grid,powered by wind and solar,each year better than the last one.
tony.
Guest
« Reply #1 on: November 30, 2010, 08:14:14 AM »

I suppose you could sit them on a kingspan sheet and plywood and cut the same material to make boxes around the batteries,obviously not going higher than the battery itself.

Those with the cash to splash could buy a Ex rated heater!

Tony
Logged
Iain
Hero Member
*****
Offline Offline

Posts: 1707


« Reply #2 on: November 30, 2010, 02:16:04 PM »

Hi
If it is any use, we started trickle charging the seaboats batteries when at sea in the colder climes. The boat was kept on the upperdeck of the ship. When it was very cold the batteries were not able to start the boat engine due to the reduced capacity of the battery when cold. We started trickle charging the batteries (only about 1/2A -1A).
It was enough the keep the batteries from getting too cold and kept them active. Just had to remember to unplug them before launching the boat!!
Iain
Logged

1.98kWp PV (11 x Sharp 180 and SB 2.5)
20 x 65mm Thermal and 180ltr unvented
Powervault 4Kw - G200 Lithium-Ion (LiFePO4)
9000ltr rainwater storage   Plymouth
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
SMFAds for Free Forums
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!