Renewable Energy and Sustainability Forum
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Anyone wishing to register as a new member on the forum is strongly recommended to use a "proper" email address. Following continuous spam/hack attempts on the forum, "disposable" email addresses like Gmail, Yahoo and Hotmail tend to be viewed with suspicion, and the application rejected if there is any doubt whatsoever
Recent Articles: Navitron Partners With Solax to Help Create A More Sustainable Future | Navitron Calls for Increased Carbon Footprint Reduction In Light of Earth Overshoot Day | A plea from The David School - Issue 18
   Home   Help Search Login Register  
Pages: [1]   Go Down
Author Topic: Setting Ecodan ASHP flow temperature.  (Read 2174 times)
Full Member
Offline Offline

Posts: 115

« on: November 30, 2010, 07:11:10 PM »


I have a Mitsubishi 14kw Ecodan and I want to increase the heating temperature flow from 50 to 55 degrees. I have followed the manaul and using the Mitsubishi programmer i've set and saved the higher temperature.

When the system is running the display on the programmer has two temperatures. The bigger of the two fonts I believe is the target temperature (directly below the Eco Heating Icon) and the smaller is the actual current temperature. But despite setting the target to 55 the displays says 52.

Have I mis-understood something?

Thanks in advance,

Pages: [1]   Go Up
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
SMFAds for Free Forums
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!