Renewable Energy and Sustainability Forum
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Anyone wishing to register as a new member on the forum is strongly recommended to use a "proper" email address. Following continuous spam/hack attempts on the forum, "disposable" email addresses like Gmail, Yahoo and Hotmail tend to be viewed with suspicion, and the application rejected if there is any doubt whatsoever
Recent Articles: Navitron Partners With Solax to Help Create A More Sustainable Future | Navitron Calls for Increased Carbon Footprint Reduction In Light of Earth Overshoot Day | A plea from The David School - Issue 18
   Home   Help Search Login Register  
Pages: 1 2 3 4 [5]   Go Down
Author Topic: help please! Just turned on WRB09 first time since buying it in 2005  (Read 11982 times)
Jr. Member
Offline Offline

Posts: 71

« Reply #60 on: January 06, 2011, 09:14:15 PM »


Just to help things along I will share my thoughts/findings!

We have a later version of the WRB09 and the flow switches are built in
We had the same starting problem as Roger - had to adjust the flow switches as they were set to max!
The wiring is essentially the same but the items in the control box are in different places (main PCB is the same though)
Rather than shorting out the inputs/flow switches, you can simply switch the small switches that are below the red row of LED's
All the inputs are low voltage and isolated so should be safe - us caution anyway!
I had the same E04 error - cause was air in the heating side
I have reconfigured the controller to take an external input (to turn the heatpump on/off) on the pin called 'Link' - hence do not use the timer on the heatpump

Hope that helps!

Pages: 1 2 3 4 [5]   Go Up
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
SMFAds for Free Forums
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!