navitron
 
Renewable Energy and Sustainability Forum
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Anyone wishing to register as a new member on the forum is strongly recommended to use a "proper" email address - following recent spam/hack attempts on the forum, all security is set to "high", and "disposable" email addresses like Gmail, Yahoo and Hotmail tend to be viewed with suspicion, and the application rejected if there is any doubt whatsoever
 
Recent Articles: Navitron Partners With Solax to Help Create A More Sustainable Future | Navitron Calls for Increased Carbon Footprint Reduction In Light of Earth Overshoot Day | A plea from The David School - Issue 18
   Home   Help Search Login Register  
Pages: 1 2 [3]   Go Down
  Print  
Author Topic: Adding a grid tie turbine to an off grid setup  (Read 3371 times)
billi
Global Moderator
Hero Member
*****
Offline Offline

Posts: 8926



WWW
« Reply #30 on: February 20, 2015, 11:30:24 AM »

Yes Billi, it seems Victron have been able to push the newer Multis a bit further with firmware updates. Amazing what you can have them do via software now. I've got ours all hooked out through their Color Control panel to the outside world - https://vrm.victronenergy.com/site/share/3b08d1c1 which gives me something else to tinker with.


Sure ,  if the Victron is upto date ,  and can communicate with the Aurora Wind GTI  and handle the charge current , then surely , like i said , AC coupling  a windturbine  in an off grid PV idea , is beside MPPT controllers , your best choice

Regards
Billi
Logged

1.6 kw and 2.4 kw   PV array  , Outback MX 60 and FM80 charge controller  ,24 volt 1600 AH Battery ,6 Kw Victron inverter charger, 1.1 kw high head hydro turbine as a back up generator , 5 kw woodburner, 36 solar tubes with 360 l water tank, 1.6 kw  windturbine
Pages: 1 2 [3]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
SMFAds for Free Forums
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!