navitron
 
Renewable Energy and Sustainability Forum
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Anyone wishing to register as a new member on the forum is strongly recommended to use a "proper" email address - following recent spam/hack attempts on the forum, all security is set to "high", and "disposable" email addresses like Gmail, Yahoo and Hotmail tend to be viewed with suspicion, and the application rejected if there is any doubt whatsoever
 
Recent Articles: Navitron Partners With Solax to Help Create A More Sustainable Future | Navitron Calls for Increased Carbon Footprint Reduction In Light of Earth Overshoot Day | A plea from The David School - Issue 18
   Home   Help Search Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: December 2017 RPI  (Read 3484 times)
Ralpharoo
Jr. Member
**
Offline Offline

Posts: 81



« on: January 16, 2018, 10:34:10 AM »

It looks like December's RPI value is 4.1% - a nice uplift to FIT payments from April 1st.

https://www.ons.gov.uk/economy/inflationandpriceindices

Logged

3.92 kWp south facing. north west Cumbria
linesrg
Hero Member
*****
Offline Offline

Posts: 793



WWW
« Reply #1 on: January 16, 2018, 03:07:29 PM »

Good Afternoon All,

I bet somebody somewhere will be trying very hard to find a way of not paying that much.  Grin Grin

Regards

Richard
Logged

16 BP380 on a Lorentz ETATRACK1000/SB1700, 16 Chinese 80W/SB1700, 16 BP380/SMA SB1700. CTC GSi12 + Ecosol + Flowbox 8010e/Gledhill ASL0085 EHS/3 Navitron 4720AL solar ET panels and Immersun T1060/ T1070/ T1090. 7 Tianwei 235W/ Aurora PVI 3.6kW/ Growatt SP2000 c/w 5kWhr battery and a Renault Zoe
paul149
Hero Member
*****
Offline Offline

Posts: 675


« Reply #2 on: January 17, 2018, 11:07:18 AM »

Wow that's gonna be quite a rise ( if it follows through) especially for the early adopters!
Same old story % of a lot = a lot!!
Anyone done the figures for the high rate of solar PV yet? I can't personally right now!
Paul m.
« Last Edit: January 17, 2018, 02:05:47 PM by paul149 » Logged

3.5 kWp (14 x Sanyo H250E01 + SB3000TL) 225' (SW) at 35' Pitch Lat 51.30' (Bristol) Installed cost 2.63/Wp (Nov 2011) now with solarimmersion and 250L unvented dhw (Very Little gas input for DHW from Apr to mid Sep)
dan_b
Hero Member
*****
Offline Offline

Posts: 3580


WWW
« Reply #3 on: January 17, 2018, 11:19:05 AM »

Aah, inflation. Sometimes it's good, sometimes it's bad. Depending on your point of view!
Logged

3.06kWp SolarEdge system with a split array:
2.18kWp 10x South facing, plus 4x West facing 880W

Mk1 ImmerSUN DHW diverter
4kW PowerVault Battery
marshman
Hero Member
*****
Offline Offline

Posts: 833


WWW
« Reply #4 on: January 17, 2018, 01:00:44 PM »

Wow that's gonna be quite a rise ( if it follows through) especially for the early adopters!
Same old story % of a lot = a lot!!
Anyone done the figures for the high rate of solar PV yet? I can personally right now!
Paul m.


52.74p   generation   

3.71p    export

Both figures for initial FiT rate on small retrofit system.

Also applies to the RHI,  GSHP   20.67p  / kWh   after April 1st


Logged

3.15kWpk (15xSharp ND210)/SB3000. & 3.675kWpk (15 x Suntech 245WD)/SB4000TL, 10kW GSHP driving Wirsbo underfloor heating from 1200m ground loops. 10' x 7' solar wall (experimental). Clearview 650 Wood Burning Stove. MHRV - diy retrofit. Triple glazing.
paul149
Hero Member
*****
Offline Offline

Posts: 675


« Reply #5 on: February 11, 2018, 11:24:52 PM »

I read it as Gen = 52.75p
                 Exp =   3.72p.    Therefore effectively 0.5461 per kWh.

https://www.ofgem.gov.uk/system/files/docs/2018/02/rpi_adjusted_tariff_table_0_1.xlsx

Paul m.
Logged

3.5 kWp (14 x Sanyo H250E01 + SB3000TL) 225' (SW) at 35' Pitch Lat 51.30' (Bristol) Installed cost 2.63/Wp (Nov 2011) now with solarimmersion and 250L unvented dhw (Very Little gas input for DHW from Apr to mid Sep)
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
SMFAds for Free Forums
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!