Renewable Energy and Sustainability Forum
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Anyone wishing to register as a new member on the forum is strongly recommended to use a "proper" email address. Following continuous spam/hack attempts on the forum, "disposable" email addresses like Gmail, Yahoo and Hotmail tend to be viewed with suspicion, and the application rejected if there is any doubt whatsoever
Recent Articles: Navitron Partners With Solax to Help Create A More Sustainable Future | Navitron Calls for Increased Carbon Footprint Reduction In Light of Earth Overshoot Day | A plea from The David School - Issue 18
   Home   Help Search Login Register  
Pages: [1]   Go Down
Author Topic: Washing machine filters  (Read 754 times)
Hero Member
Offline Offline

Posts: 1901

Sunny North-East Hampshire

« on: April 09, 2019, 12:51:21 PM »

My machine was 15 years old, working but noisy and inefficient.
My mate moved into a flat with an existing machine, so his 2 year old Zanussi ZWN 6120L was offered for nothing as 'not really that good, but newer than yours'.
First thing is to remove the door seal and scrub it in a sink of hot water. (Gunge/slime removal, yeuch!!), then screw it all back together.
There was a rustling noise when the drum was rotated, so peered through the holes with a torch, to see chalk  Huh.
Remove craptrap at the front, it was solid, raked it out. Stuck a finger up the hose from the craptrap, also solid. Remove hose back to the tub, also solid.
Remove heater element, solid. Shocked Shocked
Altogether I must have removed about 4 pints of stones/gravel etc, then after 3 rinse-cycles and 2 soda hot-washes it now runs clear and clean.  Grin Grin Grin
Moral to story is; remember to check the pump trap at the front of the machine on a regular basis, especially if you have an 18 year old son (labourer) who does his bit by doing his own washing, but doesn't rinse the screed off his work-clothes before stuffing them in the machine facepalm.
(Go into the kitchen and check yours Wink )

« Last Edit: April 09, 2019, 02:33:05 PM by Nickel2 » Logged

1.140kW mono south-facing at 49*
EpEver 4210A at 24v
New (Old) 8S7P LiFe battery, 105Ah @ 26.4V
EpEver STI1000-24-230 pure sine inverter
Of course it'll work. (It hasn't caught fire yet).
Nissan micra Spirita   (Short range)
Pages: [1]   Go Up
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
SMFAds for Free Forums
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!