Renewable Energy and Sustainability Forum
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Anyone wishing to register as a new member on the forum is strongly recommended to use a "proper" email address. Following continuous spam/hack attempts on the forum, "disposable" email addresses like Gmail, Yahoo and Hotmail tend to be viewed with suspicion, and the application rejected if there is any doubt whatsoever
Recent Articles: Navitron Partners With Solax to Help Create A More Sustainable Future | Navitron Calls for Increased Carbon Footprint Reduction In Light of Earth Overshoot Day | A plea from The David School - Issue 18
   Home   Help Search Login Register  
Pages: [1]   Go Down
Author Topic: proven, kinspan, sd wind tower component for 6kw  (Read 1245 times)
Jr. Member
Offline Offline

Posts: 54

« on: November 16, 2020, 08:55:59 AM »

I am looking for a component for a Hutchinson tower for a 6kw proven turbine. It is the spigot piece which the tower mounts on.
Please let me know if you have any tower components for a 6kw turbine.


off grid 4 years: 2.5kw pv,sunny island 5048, 2 mx 60s, proven 2.5 48v, home made charge controller, 1500Ah fork lift batteries, 60 evacuated tube solar heating, vigas 40 kw biomas boiler, 3000l thermal store
Offline Offline

Posts: 20

« Reply #1 on: November 17, 2020, 04:52:57 PM »

Hi Justin,

If you're not looking to make one yourself, SD wind would no doubt sell you one. No idea on cost though. The last one I needed I made up from a laser cut flange (cost approx 35) and the top cut off a spare 9m tower. I know SD make up a number of adapters for different towers for the easy life. Otherwise 2 bits of pole and a lasercut flange / reinforcers and make yourself.

Pages: [1]   Go Up
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
SMFAds for Free Forums
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!