navitron
 
Renewable Energy and Sustainability Forum
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Anyone wishing to register as a new member on the forum is strongly recommended to use a "proper" email address - following recent spam/hack attempts on the forum, all security is set to "high", and "disposable" email addresses like Gmail, Yahoo and Hotmail tend to be viewed with suspicion, and the application rejected if there is any doubt whatsoever
 
Recent Articles: Navitron Partners With Solax to Help Create A More Sustainable Future | Navitron Calls for Increased Carbon Footprint Reduction In Light of Earth Overshoot Day | A plea from The David School - Issue 18
   Home   Help Search Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Pipe and pump for open loop system  (Read 1656 times)
dbass999
Newbie
*
Offline Offline

Posts: 5


« on: October 16, 2006, 01:17:43 PM »

Iíve ordered an WRB05. Iím planning to use my river in an open loop system. Can you advise about pump and pipe size? I canít find any information for open systems. The whole pipe length will be 40m and Iím wondering what pipe diameter will be the most efficient and what size pump will be necessary. Presumably a wider bore pipe and a smaller pump would work for an open system as compared to a closed?
many thanks...
james
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
SMFAds for Free Forums
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!