Renewable Energy and Sustainability Forum
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Anyone wishing to register as a new member on the forum is strongly recommended to use a "proper" email address. Following continuous spam/hack attempts on the forum, "disposable" email addresses like Gmail, Yahoo and Hotmail tend to be viewed with suspicion, and the application rejected if there is any doubt whatsoever
Recent Articles: Navitron Partners With Solax to Help Create A More Sustainable Future | Navitron Calls for Increased Carbon Footprint Reduction In Light of Earth Overshoot Day | A plea from The David School - Issue 18
   Home   Help Search Login Register  
Pages: [1]   Go Down
Author Topic: Split +/-6V from a 12V battery  (Read 1287 times)
Hero Member
Offline Offline

Posts: 2221

St Barnabas Chapel (2009)

« on: July 02, 2009, 02:24:05 PM »

I am rather hoping there is an easy answer to this question. I am looking for a C 100Ah 12V battery where the cells can be split to give +/-6V. Possibly 2 6V batteries might be better? The battery is to be semi-portable and used in a marine environment. Any suggestions?

Gestis Censere. 40x47mm DHW with TDC3. 3kW ASHP, 9kW GSHP, 3kW Navitron PV with Platinum 3100S GTI, 6.5kW WBS, 5 chickens. FMY 2009.
Hero Member
Offline Offline

Posts: 2824

« Reply #1 on: July 02, 2009, 02:28:53 PM »

yeah... 2 6v batteries would be the easiest way....

what's it for ?

if you use two 6v batteries to give 12v

but then run one of the 6v batteies flat you'll also lose your 12v power Shocked
Pages: [1]   Go Up
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
SMFAds for Free Forums
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!