Renewable Energy and Sustainability Forum
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Anyone wishing to register as a new member on the forum is strongly recommended to use a "proper" email address. Following continuous spam/hack attempts on the forum, "disposable" email addresses like Gmail, Yahoo and Hotmail tend to be viewed with suspicion, and the application rejected if there is any doubt whatsoever
Recent Articles: Navitron Partners With Solax to Help Create A More Sustainable Future | Navitron Calls for Increased Carbon Footprint Reduction In Light of Earth Overshoot Day | A plea from The David School - Issue 18
   Home   Help Search Login Register  
Pages: [1]   Go Down
Author Topic: heat leak radiator  (Read 2462 times)
Full Member
Offline Offline

Posts: 198

« on: September 01, 2009, 09:29:38 PM »

Hi All

installing woodburner with backboiler with gravity feed to heatstore.

recognise need for heat leak rad.

does flow and return to heat leak come off main flow or main return? or both?



we don't plan to fail we only fail to plan
Hero Member
Offline Offline

Posts: 1348

« Reply #1 on: September 01, 2009, 10:23:40 PM »

flow to top of rad, return from the bottom to the return, so in effect it is a bypass of sorts.

remember that there are to be NO valves, and that the 28mm must get to within 300mm of the rad.

changing the world, one roof at a time.

Quality is never an accident; It is always the result of
high intention, sincere effort, intelligent direction, and
skilful execution; It represents the wise choice of many
Pages: [1]   Go Up
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
SMFAds for Free Forums
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!