Renewable Energy and Sustainability Forum
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Anyone wishing to register as a new member on the forum is strongly recommended to use a "proper" email address. Following continuous spam/hack attempts on the forum, "disposable" email addresses like Gmail, Yahoo and Hotmail tend to be viewed with suspicion, and the application rejected if there is any doubt whatsoever
Recent Articles: Navitron Partners With Solax to Help Create A More Sustainable Future | Navitron Calls for Increased Carbon Footprint Reduction In Light of Earth Overshoot Day | A plea from The David School - Issue 18
   Home   Help Search Login Register  
Pages: [1]   Go Down
Author Topic: Navitrons 10kw genset  (Read 1802 times)
Offline Offline

Posts: 19

« on: January 06, 2007, 11:37:27 AM »

I am installing a pellet boiler in a factory, they already have a 5kw wind turbine.  They want me to install a 10kw genset also. 
Their idea is: when its windy the turbine will produce most of the electrical power, any extra diverts to a immersion heater in a 3000lt tank.  The pellet boiler will heat the water in the tank for heating.  They want the 10kw genset to automatically kick in when the battery bank is low and recharge the bank then shut down, I am thinking using the heat from the water cooling on the genset to be added to the tank.  Can Navitrons 10kw genset do the above?   
Pages: [1]   Go Up
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
SMFAds for Free Forums
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!